 |
Racks are available with between 1 to 12 circuits.
A single rack can accomodate any configuration of load type.
A system can be comprised of any number of any number of racks and plates. |
- Voltage range, selected by a switch on the dimmer card.
- 180-260V rms
- 40-80Hz frequency range.
- Separate phase per circuit.
- Convection cooling for all load ratings.
- Personality™ chip for network image and scene control variables, to allow 'hot-swapping' of dimmer cards.
- Thermal protection.
- Low voltage input opto-isolated.
- Low audible noise.
- Programmable fade rates per scene.
- Proportional fading.
- Current sensing.
- Able to accommodate a high rate of change in frequency.
- Input for emergency lighting circuits with relay control.
- Short-circuit/overload protection
- Stabilisation with respect to input voltage.
- Stabilisation with respect to input frequency for noisy input supplies
|
|
- DMX512
- Allows the dimming rack to be controlled by entertainment DMX controllers.
- RS232
- Allows the dimming rack to be controlled by AV systems using an RS232 link.
- LonWorks
- Integration of SceneMaster8000 with building Management Systems (BMS) and the Leax ControlMaster7000 lighting control range.
- Analogue input
- Analogue current sink or source control.
- For use with 0-10V or 1-10V devices.
- Volt-free
- Input for fire, security, AV systems, BMS, lighting control and partitioning
|
